AllTest® Urine Drug Test Panel for ETG300

【SUMMARY】

Ethyl Glucuronide (ETG) is a metabolite of ethyl alcohol which is formed in the body byglucuronidation following exposure to ethanol, such as by drinking alcoholic beverages. Itisused as a biomarker to test for ethanol use and to monitor alcohol abstinence in situationswhere drinking is prohibited, such as in the military, in professional monitoring programs(health professionals, attorneys, airline pilots in recovery from addictions), in schools, inliver transplant clinics, or in recovering alcoholic patients. ETG can be measured in urine by Traditional laboratory methods (GC/MS or LC/MS) upto approximately 80 hours after ethanol is ingested (greatly dependent on the amount of alcoholic and non-alcoholic drinks). ETG is a more accurate indicator of therecent exposure to alcohol than measuring for the presence of ethanol itself.

【DIRECTIONS FOR CASSETTE USE】
Allow the test, urine specimen, and/or controls to reach room temperature (15-30°C) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test cassette from the sealed pouch and use it within one hour.
2. Place the test cassette on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approx. 120μL) to the specimen well (S) of the test cassette, and then start the timer. Avoid trapping air bubbles in the specimen well (S). See the illustration below.
3. Wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10minutes.

Cassette/Dipstick/Panel Ethyl Glucuronide (ETG) urine 500 ng/mL*1000 ng/mL Rapid Drug Abuse Test Kit For The Diagnosis 0

【DIRECTIONS FOR PANEL USE】
Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.
1. Remove the test panel from the sealed pouch and use it as soon as possible.
2. Remove the cap.
3. With the arrow pointing toward the urine specimen, immerse the test panel vertically in the urine specimen for at least 10 to 15 seconds. Immerse the strip to at least the level of the wavy lines, but do no touch the plastic device.
4. Replace the cap and place the test panel on a non-absorbent flat surface.
5. Start the timer and wait for the colored line(s) to appear.
6. The result should be read at 5 minutes. Do not interpret the result after 10 minutes.

Cassette/Dipstick/Panel Ethyl Glucuronide (ETG) urine 500 ng/mL*1000 ng/mL Rapid Drug Abuse Test Kit For The Diagnosis 1

【DIRECTIONS FOR DIPSTICK USE】
Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test dipstick from the sealed pouch and use it within one hour.
2. With arrows pointing toward the urine specimen, immerse the test dipstick vertically in the urine specimen for at least 10-15 seconds. Do not pass the maximum line (MAX) on the Test Dipstick when immersing the strip. See the illustration below.
3. Place the test dipstick on a non-absorbent flat surface, start the timer and wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10 minutes.

Cassette/Dipstick/Panel Ethyl Glucuronide (ETG) urine 500 ng/mL*1000 ng/mL Rapid Drug Abuse Test Kit For The Diagnosis 2

Test Type	Drug Test
Panel Count
Results Time	5 Minutes
Accuracy	99%
Sample Type	Urine
Certifications
Brand	AllTest
SKU	DET-114g

🧪 Collect sample
🔒 Secure the lid tightly
📍 Place on a flat surface
⏱️ Wait 5 minutes
📊 Read results

🚚 Orders before 1 PM EST ship same day (UPS Ground or equivalent)
⚡ Fast processing is always our priority
📦 Bulk orders may require additional processing time
↩️ 24-hour cancellation window
📦 Returns: buyer pays shipping + 15% restocking fee

AllTest® Urine Drug Test Panel for ETG300 | DET-114g (25/box)

🛒 Customers Also Bought